HBVCAM IMX219 8MP NVIDIA Jetson Nano Camera Module
This is the camera moudle for Nvidia Jetson Nano , connected to CSI interface. It is IMX219 sensor , with 8 million pixel. And the Diagonal field angle is about 77 degree , suitable for normal situation using.
HBVCAM IMX219 8MP NVIDIA Jetson Nano Camera Module
( not include Jetson Nano board)
Module No. | HBVCAM-HPLCC-8M | |
Module Size | 25mm × 24mm ×5.3±0.2mm | |
Temperature (Operation) | -20°C to 70°C | |
Temperature (Stable Image) | 0°C to 50°C | |
Assembly technique | SMT (ROSH) | |
Focus | Fixed | |
Object distance | 30CM-∞ | |
Resolution | 800LW/PH (Center) | |
PCB printing ink | Black | |
interface | 15p-1.0 mipi | |
Working power supply | 3.3v(pin15) | |
Operating system | Jeston Nano | |
Package | Anti-electrostatic tray | |
Certifications | FCC and CE | |
Sensor Type | IMX219 (1/4” ) | |
Active Array Size | 3296*2512 | |
Sensitivity | 600mV/Lux-sec | |
Pixel Size | 1.12µm x1.12µm | |
Maximum Image Transfer Rate | 30 fps for QSXGA; | |
Output formats | 8/10bit RGB RAW output | |
S/N Ratio | 39db | |
Dynamic Range | 69db | |
Package | PLCC,Bare Die | |
Lens Type | ||
Lens Construction | 4P | |
F/No | 2.0 | |
EFL | 2.93mm | |
BFL(Optical) | 1.16mm | |
FOV | 77° | |
TV Distortion | <1.0% | |
Relative Illumination (Sensor) | 70% | |
IR Filter | 650±10nm |
Does this camera support Raspberry Pi ?
Hi,Sorry, this camera is applicable for Jetson Nano. Not suit for Raspberry Pi.